Products
Products Search
QC
Quality Guarantee
A.Quality guarantee in one year (any broken, Crash, come off, wrong size, except human made broken)
B.Non-degumming guarantee for one year (No climbing, no running, no water immersing)
C.Sales process, customer feedbacks are welcomed, quickly response in 1 hour for customers' feedback
Products do not reach the QC Standard
(Experienced QC inspects the shoes one by one before packing, never receive any complains from customers.)
1.EYELET AND LACE DEFECTS---Loose Eyelet
2.UPPER DIRTY---Glue Stain
3.QUARTER DEFECT---Glue Slip Out
4.DAMAGED UPPER DEFECTS---Scratch Mark on Upper
A.Quality guarantee in one year (any broken, Crash, come off, wrong size, except human made broken)
B.Non-degumming guarantee for one year (No climbing, no running, no water immersing)
C.Sales process, customer feedbacks are welcomed, quickly response in 1 hour for customers' feedback
Products do not reach the QC Standard
(Experienced QC inspects the shoes one by one before packing, never receive any complains from customers.)
1.EYELET AND LACE DEFECTS---Loose Eyelet
2.UPPER DIRTY---Glue Stain
3.QUARTER DEFECT---Glue Slip Out
4.DAMAGED UPPER DEFECTS---Scratch Mark on Upper
|
Check the contents
|
Result
|
|
COLOR VARIATION DEFECTS
|
|
|
Poor antique treatment.
|
|
|
Variation between left and right shoe.
|
|
|
Color variation between different pieces of upper.
|
|
|
Color of stitching and upper material not matching(as per conformation sample.)
|
|
|
Wrong color on ornaments and lace.
|
|
|
Poor printing and embroidery.
|
|
|
Contrast color of PU coaling and backing fabric.
|
|
|
Other color variation defects.
|
|
|
DAMAGED UPPER DEFECTS
|
|
|
Scratch mark on upper.
|
|
|
Cut upper.
|
|
|
Visible roughing marks more than 1.5-mm or conspicuous.
|
|
|
Torn upper caused either by high stitch density or poor reinforcement.
|
|
|
Poor heat embossing.
|
|
|
Toe box collapsing.
|
|
|
Missing or incorrect material embossment.
|
|
|
Loose or missing ornament parts.
|
|
|
Broken strap.
|
|
|
Other damaged upper defects.
|
|
|
CROOKED UPPER DEFECTS
|
|
|
Topline crooked or wavy.
|
|
|
Back seam off center, twisted or not vertical to heel seat by 2.0-mm
|
|
|
Back heights not uniform within pair.
|
|
|
Different vamp length of left and right foot over 2.0-mm.
|
|
|
Crooked upper caused by mis-stitching of moccasin construction.
|
|
|
Crooked open toe in sandal construction.
|
|
|
Other crooked upper defects.
|
|
|
EYELET AND LACE DEFECTS
|
|
|
Punched bigger or smaller than eyelet
|
|
|
Poor eyelet attachment.
|
|
|
Loose eyelet.
|
|
|
Paint coat peeling off.
|
|
|
Rust on eyelet or other metal buckles
|
|
|
Laced wrong for easy try on.
|
|
|
Broken yam.
|
|
|
Wrong length,(need ton lace up the measure for length)
|
|
|
Wrong color, wrong material , or wrong type of lace.
|
|
|
Eyelet row not uniform by 2.4-mm.
|
|
|
Dirty marks on lace.
|
|
|
Shoelaces tied together.
|
|
|
Other eyelet and lace defects.
|
|
|
LINING DEFECTS(Includes vamp, sock, and counter lining)
|
|
|
Lining dirty, damaged or wrinkled.
|
|
|
Trimming damage on topline stitching, causing lining to show gap.
|
|
|
Sock lining gap not deeper than 2-mm
|
|
|
Cementing off, between upper and lining.
|
|
|
Poor or unclear markings.
|
|
|
Other lining defects.
|
|
|
STITCHING DEFETS-SG
|
|
|
Crooked stitching (out of stitching mark).
|
|
|
High, low, or uneven stitch density.
|
|
|
Stitching too close to seam edge.
|
|
|
stitching
|
|
|
Skipped stitch on upper.
|
|
|
Incorrect needle type.
|
|
|
Open seam.
|
|
|
Incorrect thread size.
|
|
|
Thread ends.
|
|
|
Other stitching defects.
|
|
|
UPPER DIRTY-UD
|
|
|
Glue stain.
|
|
|
Dirty marks.
|
|
|
High glue line more than 1.5-mm in any area.
|
|
|
Frayed edge of PVC/PU upper material.
|
|
|
Meld or Mildew.
|
|
|
thread residue
|
|
|
fading, fugitive color
|
|
|
color shade, off shade, color deviation
|
|
|
raw edge leans out of seam
|
|
|
washing quality is not good
|
|
|
Other upper dirty defects
|
|
|
WRINKLED UPPER DEFECTS
|
|
|
Wrinkles caused by poor lasting.
|
|
|
Wrinkles caused by poor bottoming.
|
|
|
Wrinkles caused by distorted upper
|
|
|
Other wrinkles upper defects.
|
|
|
UPPER DEFECT CATEGORY – UCOUNTER DEFECTS - CO
|
|
|
Counter sheet not lasted under insole.
|
|
|
Wrinkled counter caused either by poor lasting or by wrinkled chemical sheet.
|
|
|
Soft chemical sheet due to wrong material or wrong primer.
|
|
|
Crooked chemical sheet.
|
|
|
Low positioned chemical sheet.
|
|
|
Blisters on counter.
|
|
|
Other counter defects.
|
|
|
Back height not uniform within pair by 2.0-mm or more.
|
|
|
X-RAY DEFECTS-XR
|
|
|
X-ray lines on and part of upper showing through due to edge folding, chemical sheet, toe cap, etc.
|
|
|
X-ray lines of upper lasting allowance showing through on bottom due to improper buffing or filler.
|
|
|
Other X-ray defects.其它的X-ray
|
|
|
SOLE DEFECTS CATEGOTY-S SOLE BOTTOM SIRTY DEFECTS
|
|
|
Dirty marks.
|
|
|
Poor outsole printing or paint peels off.
|
|
|
Impurities in sole material.
|
|
|
Rough edge of EVA outsole.
|
|
|
Other bottom dirty defects.
|
|
|
SOLE BOTTOM GAPPING DEFECTS
|
|
|
Any gap or small hole at the bottom edge, where the bottom meets the upper.
|
|
|
Toe or heel bumper peeling off at edges.
|
|
|
Gapping between midsole and outsole.
|
|
|
Gapping between EVA bottom and welt
|
|
|
Gapping between any layered soles
|
|
|
Other sole gapping defects. Critical significant amount of gapping before pulling.
|
|
|
Major when pulled on, gaps easily.
|
|
|
Minor when pulled hard, some gapping.
|
|
|
SOLE BOTTOM ADHESION DEFECTS
|
|
|
Sole easily pulls away from upper during manual examination.
|
|
|
Sole failed to meet minimum sole-bond-peeling standard after mechanical pull test.
|
|
|
HEEL OR TOPLIFT DEFECTS HT
|
|
|
Leaning heel(where the heal itself crooked).
|
|
|
Protruding or nail head on heel seat, inside of shoe. (critical)
|
|
|
Loose top lift.
|
|
|
Protruding of nail on heel stem (sticks out of side heel).
|
|
|
Blister, scratch mark, dirty mark or cut on heel cover.
|
|
|
Other heel or top lift defects.
|
|
|
SOLE PLACEMENT/SIZE DEFECTS-PS
|
|
|
Crooked positioning of outsole more than 2-mm.
|
|
|
Toe spring too high.
|
|
|
Other placement/size defects.
|
|
|
PACKAGING PROBKEM TYPE-PK INFORMATION ACCURACY DEFECTS
|
|
|
Wrong size in case
|
|
|
Mismate
|
|
|
Wrong lot# in case.(critical)
|
|
|
Pair shortage
|
|
|
Other packing accuracy defects
|
|
|
PRODUCT MARKING DEFECTS
|
|
|
Product (batch) code wrong.
|
|
|
Product (batch) code missing
|
|
|
Lot# wrong on product. (Critical)
|
|
|
Lot# missing on product. (Critical)
|
|
|
Missing or wrong bar code ticket on product.
|
|
|
Ticket upside down/sideways (incidental).
|
|
|
Missing “TM”or “R”at brand name.
|
|
|
Wrong price. (Critical)
|
|
|
Price ticket curled up (incidental).
|
|
|
Wrong data in bar code. (Major)
|
|
|
Incorrect product labeling.
|
|
|
Shoe ticket in wrong location.
|
|
|
Other product marking defects
|
|
|
CASE LABLE MARKING DEFECTS
|
|
|
Wrong alpha or size.
|
|
|
Missing/illegible alpha or size.
|
|
|
Wrong pair quantity.
|
|
|
Missing/illegible pair quantity.
|
|
|
Wrong lot#.
|
|
|
Missing/illegible lot#.
|
|
|
Wrong PO #.
|
|
|
Missing/illegible PO #.
|
|
|
Less than 2 labels per case.
|
|
|
Applied in wrong position.
|
|
|
Carton tape covering the bar code or quiet zone.
|
|
|
Bad data in bar code.
|
|
|
Case label bar code not ANSI Grade C or better.
|
|
|
Other case label defects. (Minor or Major)
|
|
|
SHOE BOX MARKING DEFECTS
|
|
|
Illegible or wrong lot# on shoe box. (Critical)
|
|
|
Illegible or wrong size on shoe box.
|
|
|
PCL misplaced.
|
|
|
Bottom edge of PCL over-hanging bottom edge of box.
|
|
|
Bottom edge of PCL more than 10-mm away from bottom edge of box at any point.
|
|
|
PCL skewed 11°(10-mm) or more.
|
|
|
Wrinkled or folded PCL.
|
|
|
Colored exterior layer of box removed, exposing white under layer in an attempt to reposition an incorrectly applied label. (Minor)
|
|
|
PCL missing.
|
|
|
Wrong PCL. (Critical)
|
|
|
PCL not ANSI Grade C or better.
|
|
|
Other shoe box information defects.
|
|
|
PACKAGING MATERIALS DEFECTS CATEGORY-M CASE DEFECTS
|
|
|
Overweight case.
|
|
|
Over or under-sized case.
|
|
|
Bands or straps used.
|
|
|
Inadequate corrugated material.
|
|
|
Alpha not 2 tier and 2 box sizes
|
|
|
Solid not 1 tier if shoe box＞8 long.
|
|
|
Cased packed upside down.
|
|
|
Other case material defects.
|
|
|
shrinking of export carton
|
|
|
export carton damaged
|
|